Product Search
Search results for 'C-1621'
Showing 41 - 61 of 563 Total Results
CA-0610
Location: Air Entrainment/Roll-A-Meter
The lightweight aluminum Roll-A-Meter is used to determine the air content of concrete mixes, and is recommended for concrete containing lightweight aggregates, air-cooled slag or highly porous aggregates.
SA-1500
Location: Static Cone Penetrometer
Static Cone Penetrometers from Test Mark are used to evaluate the consistency of soils, their level of compaction and the bearing capacity of shallow foundations and pavement sub-grades.
(3) options
Location: Test Platens
Used for testing 6” (152 mm) concrete cubes and cylinders in compression . The platens bearing block is 6.5” (152 mm) square, through hardened to HRC 55 or greater, plane to .0005” (.012 mm) in any 6” (152 mm) area, has concentric circles for easier centering of cylinders and is hard nickel plated...
CA-3130
Location: Vicat Apparatus
Used with CA-3110 Modified Vicat Apparatus for false set determination, mold is 2" x 2" x 6" (50mm x 50 mm x 150mm). Overall length including base is 9 ¼" (240 mm).
CA-4030
Location: Void Content
The void content apparatus from Test Mark is used to determine the non-compacted void content of a fine aggregate sample.
SA-0110
Location: CBR Accessories
CBR mold. 6" ID x 7" H with 2" detachable collar. Mold volume of .1145 cu. ft., cold-rolled steel tubing, plated for rust resistance. Collar extension and perforated base plate can be clamped on either end of cylinder.
Pad Caps and Retainer Rings - Steel
(16) options
Location: Unbonded Capping (Retainers and Pad Caps)
Pad caps and retainer rings are available from Test Mark as part of a complete line of concrete testing equipment and supplies.
(2) options
Location: Parts & Accessories
Test Mark hand augers feature heavy-gauge heat treated steel, zinc plated for rust resistance. Order online securely.
CA-3128
Location: Vicat Apparatus
The Brass Mold from Test Mark is used with the Modified Vicat Apparatus for Consistency and Set Time.
Digital Static Cone Penetrometer
SA-1510
Location: Static Cone Penetrometer
Digital Static Cone Penetrometer from Test Mark features a large digital readout making testing and recording readings easy.
CA-0710
Location: Chase Air
The Chase Air Kit from Test Mark provides an economical method of quickly estimating the air content of fresh concrete in the field using the isopropyl alcohol method.
Static Segregation Column Mold
CA-0359
Location: Self-Consolidating Concrete
The Static Segregation Column Mold is used to measure cohesiveness of SCC. Concrete is placed in the column and allowed to stand undisturbed. After 15 minutes, the top and bottom sections are evaluated for the amount of aggregate retained on a No. 4 (4.75 mm) sieve and segregation is calculated.
CA-3032
Location: Flow Tables
Measure is calibrated to 400 ml and is used to determine air content of hydraulic cement mortar. Cylindrical measure is 3" (76 mm) ID and approximately 3 15/32" (88 mm) deep.
Constant Head Permeameter Cell
(5) options
Location: Constant Head Permeameter Cell
The Constant Head Permeameter Cell from Test Mark is used to determine the coefficient of permeability by the constant head method for laminar flow of water through granular soils.
Curing Rack, 4" x 8" Cylinders 6/ctn
CA-0218
Location: Parts & Accessories
These durable racks are manufactured from plastic compounds and recycled materials to resist moisture, abrasion, chemical and temperature variations. Each rack has built-in handles, making them easy to carry and safely stacked 12 tiers (58") high. The racks unique open frame design allows water...
Curing Rack, 4" x 8" Cylinders 12/ctn
CA-0219
Location: Parts & Accessories
These durable racks are manufactured from plastic compounds and recycled materials to resist moisture, abrasion, chemical and temperature variations. Each rack has built-in handles, making them easy to carry and safely stacked 12 tiers (58") high. The racks unique open frame design allows water...
(3) options
Location: Test Platens
Used to determine the splitting tensile strength of concrete cylinders. . The cylinder splitting head has a bearing contact area of 12” (304 mm) long by 2” (50 mm) wide, its surface is machined plane to .001” (.025 mm) and has a scribed center line of the face of the bar for easier centering of...
SA-0360
Location: Soils
Glass plate with ground finish on one side and seamed edges. Dimensions: 12" x 12" x 3/8" thick.
Magnet Holder with Swivel Adapter Yoke
SA-2021
Location: CBR Accessories
Convenient, portable method of mounting dial indicators. Holder's Alnico magnetic base mounts on flat or curved metallic surfaces. Indicator can me mounted in almost any position.
SA-0350-S
Location: Plastic Limit
Plastic Limit Test Set consists of glass plate, 250 ml evaporating dish, spatula, 48 - 2.5 oz. sample tins and a 100 ml graduated glass cylinder.
